Shock dampener bolt is gone, anyone know what size to get?

[2252B]

Need to know what to replace the missing bolt below with.

[ATTACH=CONFIPXL_20220508_223559744.jpgG]41268[/ATTACH]

[Fiat500USA]

I have the size for the EUROPEAN Fiat 500 Rear Shock Bolts:

Top: M10x1.25 pitch 60mm Length
Bottom: M12x1.25 pitch 90mm Length

Judging from the following post and the image of the US shock, I'd say you got a good shot they are the same; Let us know.

For anyone interested, the upper mount is 32mm with a 10mm hole/bolt and the lower mount is 42ishmm with a 12mm bolt/hole. I'm going to try some kyb gas adjust shocks for a VW bus when I lower the car. They are also used as quad shocks on some mustangs. Feel much firmer than stock on compression and rebound. They have 32mm uppper and lower sleeves with 12mm holes, so I'm using a reducer bushing on the top and they came with spacers for the bottom. They have an extended length of 16.26 inches and compressed 10.55. I believe stock is 15 and 11, but I didn't not measure. these should offer more travel than stock and firmer damping.

You can try finding that size flanged bolt with washer from a fastener place (make sure it is a hardened bolt suitable for suspension)

The part number I come up with from the US lookup is: Hex Flange Head Tapping Screw & Washer - Mopar part number 6509740AA/
About $4 from the dealer.

https://store.mopar.com/oem-parts/mo...sher-6509740aa

[Fiat500USA]

I have the size for the EUROPEAN Fiat 500 Rear Shock Bolts:

Top: M10x1.25 pitch 60mm Length
Bottom: M12x1.25 pitch 90mm Length

Judging from the following post and the image of the US shock, I'd say you got a good shot they are the same; Let us know.



You can try finding that size flanged bolt with washer from a fastener place (make sure it is a hardened bolt suitable for suspension)

The part number I come up with from the US lookup is: Hex Flange Head Tapping Screw & Washer - Mopar part number 6509740AA/
About $4 from the dealer.

https://store.mopar.com/oem-parts/mo...sher-6509740aa

You're welcome.