Hey Fiat Family!
My rear started bottoming out recently (been on stock shocks and lowering springs since 2013).
I was considering going the koni route for replacements or a full coilover setup if its that much better but luckily I came across a couple of threads recommending the KYB shocks as an option and thats what I went with.
Looking at the required parts lists posted by other people I had trouble sourcing one of the listed parts so I went with another suggestion found in a different thread.
Ultimately the install required a little more work than I was initially led to believe but overall it was still fairly simple and I highly recommend it because the car now rides smooth again and no longer bottoms out.
I noticed that a lot of people were referring to my lowering springs install video when asked how to install these, but since there is a little more to the install than just unbolt and bolt in, I figured I'd make a new video.
Here is the parts list I used:
Shocks, these are sold separately so you need to order two
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Small sleeve things, you just need to order one pack
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Bigger sleeves, just order the one pack
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Link to lowering springs install. This gives more detail about how to jack up your car.
https://www.youtube.com/watch?v=28DSDWrlnN8&t=6s
Please let me know if you have any questions.
Thank you.
Bookmarks