Fiat 500 Billet Adjustable Front Swaybar End Links Set!
** PRE-BUY **
Please note this product is in the pre-buy stage which means we will make it when/if we get 10 orders. We will be updating this page frequently with status of the pre-buy.
GruvenParts.com is happy to release these Billet Front Adjustable Swaybar End Link sets for all Fiat 500 1.4L using OEM MOPAR front swaybar end link part number 68073033AB or 68073033AA or equivalent.
We start with a center body made from 6061-T651 aircraft grade aluminum hex to replace the flimsy non-adjustable OEM spaghetti links. We then add super strong 6,000 lbs radial load capacity sealed ball joints on either end to provide many years of noise free operation. Our ball joints have a built in dust boots to seal out the elements and do not require any maintenance. If they ever do need to be replaced, they can replaced separately. These linkages will not deflect under the hardest track corners and will provide the most accurate handling. The center section also utilizes special high strength steel threaded inserts to provide maximum strength and durability.
All center sections are powder coated with a thick layer of either Gloss Black or Rosso Brilliante - please choose your color during check out.
Our design allows simple and quick adjustment on the car. Simply loosen the jam nuts at either end and spin the center body portion to lengthen or shorten, then retighten the jam nuts.
This adjustable design will provide +/- 1 inch of adjustment on the car, which is enough to handle all lowered (or raised) set ups. You want the stabilizer bar end links to be as vertical as possible, perpendicular to the swaybar itself to avoid any loading in the fwd/aft direction. This product comes with new attaching hardware.
Applications :
This product comes as a set of 2 end links and replaces OEM P/N's 68073033AB or 68073033AA or equivalent on Fiat 500L 1.4L
2012-2013 Fiat 500 1.4L and any others using the front sway bar end links P/N 68073033AB or 68073033AA or equivalent
Comment