PDA

View Full Version : TSB 23-013-12 Water On Top Of Engine Cover



Fiat500USA
04-10-2012, 11:56 AM
If you experience water and/or water marks on top of the engine cover, and your VIN falls into the range listed, there is a service bulletin out:


OVERVIEW:
This bulletin involves enlarging the center push pin hole in the cowl panel and installing a
grommet to prevent water intrusion around the push pin retaining clip.

MODELS:
2012 (FF) Fiat 500 (Includes International Markets)

NOTE: This bulletin applies to vehicles built between February 19, 2011 (MDH
0219XX) and July, 8, 2011 (MDH 0708XX)

SYMPTOM/CONDITION:
The customer may experience water and/or water marks on top of the engine cover.

NUMBER: 23-013-12
DATE: March 28, 2012

DIAGNOSIS:
The source of the water intrusion onto the top of the engine cover may be caused by
the center push pin hole in the cowl panel that secures the cowl panel cover.

The repair involves installing a different push pin into the cowl. Takes less than 15 minutes.