View Full Version : Good-Win Racing Fiat 124 Exhausts NOW SHIPPING!

Good-Win Racing
11-14-2016, 06:14 PM
Hi Guys

Already shipping are RoadsterSport Quad and Dual muffler deletes!

Midpipes and Crosspipes are still in production and we hope to see those shipping end of this month.

RoadsterSport Fiat 124 Exhaust System by Good-Win Racing

First link is camera on bumper first Fiat 124 SCCA Autocross Day
<a href="https://www.youtube.com/watch?v=eEXAFemoCTM" target="_blank" rel="nofollow">


Good-Win Racing
11-14-2016, 06:19 PM
Quad Complete System with 2.5 inch Crosspipe, 2.5 Inch Resonated Midpipe.

So Much Fun!


Good-Win Racing
11-18-2016, 11:48 AM
Here is some more sound sample fun guys!

Video below is from a Canadian Alfa/Fiat dealership after installing just our Quad delete on Customer Abarth 124.
Important to note again here that NON-Abarth versions of the 124 do not get a lot of sound from the muffler delete because they have a resonator in the midpipe.
Abarth 124 versions do not have a resonator in the midpipe so they get quite a bit more sound from just the muffler delete. Nonetheless, if you want full power and
faster turbo spool then consider our full 2.5 inch setup, which is Quad Delete, 2.5 Midpipe and 2.5 inch Crosspipe (http://www.good-win-racing.com/Mazda-Performance-Part/61-2026.html) for full flow, full power.

<a href="https://www.youtube.com/watch?v=cge-nqMBkNw" target="_blank" rel="nofollow">
https://www.youtube.com/watch?v=cge-nqMBkNw (https://www.youtube.com/watch?v=cge-nqMBkNw)

Good-Win Racing
11-21-2016, 10:01 PM
Another Customer Video...

Our Quad setup on Abarth version.


Good-Win Racing
11-30-2016, 04:52 PM
Our Muffler Deletes started shipping about a month ago.
Today our HighFlow 2.5 Crosspipes (http://www.good-win-racing.com/Mazda-Performance-Part/61-2018.html) and 2.5 Midpipes (http://www.good-win-racing.com/Mazda-Performance-Part/61-2017.html) Start Shipping!
Thanks to all who waited patiently!


Robert Nixon
12-01-2016, 03:39 PM
Thanks for all the videos, the autocross in San Diego was a blast to watch too!

Good-Win Racing
12-17-2016, 10:53 PM

Used this last event to test some sway bar settings. Currently on our car is a relatively mild setup (300 front, 200 rear spring rates), full list below, and yet it was enough to lay down the fastest time today with about 200 competitors. Thanks to our buddy Patrick Sanford for great pics! Amazing result for a setup that can be driven comfortably daily.

RoadsterSport Springs (http://www.good-win-racing.com/Mazda-Performance-Part/61-1847R.html)
Koni Sport Shocks (http://www.good-win-racing.com/Mazda-Performance-Part/61-1908F.html)
Our Short BumpStops for Koni (http://www.good-win-racing.com/Mazda-Performance-Part/61-0792F.html)
Our Sway Bars (http://www.good-win-racing.com/Mazda-Performance-Part/61-1784F.html)
17x9 6UL wheels (http://www.good-win-racing.com/Mazda-Performance-Part/61-1779F.html)
Complete RoadsterSport Exhaust System (2.5 inch Crosspipe, 2.5 inch Midpipe, Quad Outlet Muffler Delete).




Good-Win Racing
12-23-2016, 10:46 AM
Hi Guys

A customer loaned us an Automatic Abarth for a week. We eventually decided to make a completely different set of part numbers for the Automatic so we could customize the solution to the particular fitment challenges in the Automatic. That starts with the Crosspipe, which is 2.25 inches on the Automatic instead of the 2.5 inches we are already shipping for the manual transmission cars. The Automatic simply has a lot less clearance, it is a chunky transmission compared with the Manual unit, so it gets 2.25 inch Crosspipe as the best fit, still much more flow than factory crunch bent pipe that gets crunched down at the inlet to only about 1.7 inches. Midpipe is also unique to the Automatic transmission though it gets to stay the full 2.5 inch size. Quad outlet muffler delete unique to Abarth versions also completed with bigger tips and more spread between the tips to better fill the cutouts on Abarth versions. Prototypes complete today, JIGS need to be made, figure at least 30 days for production to get the new parts shipping, will add them to the site soon to enable pre-orders for those who want to be first in line. Will update pics once we have first polished samples of the new parts.

Complete systems for non-Abarth versions with manual transmissions continue shipping daily.