PDA

View Full Version : Want to run 4x100 wheels that require tuner bolts? Look inside...



EMRtek
04-17-2015, 09:05 PM
http://imagizer.imageshack.us/v2/150x100q90/540/VLAlNv.jpg (http://imageshack.com/f/f0VLAlNvj)
http://imagizer.imageshack.us/v2/150x100q90/537/t9rQ5H.jpg (http://imageshack.com/f/ext9rQ5Hj)

I just got these installed and wanted to share with the Abarth community, many of the cheap aggressive 4x100 wheels require tuner bolts due to the fact they are dual bolt pattern. I was aware that many have used wobble/variation bolts successfully in the past but I had no clue wobble tuner bolts were available (got them from the UK). The design is similar to regular wobble bolts but obviously a smaller overall bolt diameter, I studied the design and I have no reason to believe these are unsafe to run.
Bolts can be purchased here:
http://www.ebay.com/itm/16-M12-x-1-25-ALLOY-WHEEL-WOBBLY-TUNER-BOLTS-TUNER-KEY-pcd-4X98-4X100-FIAT-/140683917405?pt=LH_DefaultDomain_3&hash=item20c16a385d
I also purchased hub rings, they are a must when running wobble bolts.

Here are wheels and tire specs: 16x8 et21 205-45-16 (tel:205-45-16) BFGoodrich G-Force Profiler

Davothegr8
04-18-2015, 07:59 PM
I actually purchased and installed, last week, a set of standard extended length wobble bolts from a guy on ebay. He owns a 500 and was very knowledgeable. Ive got about 13mm in the hub with my 12mm spacers.

JLFast
04-18-2015, 09:14 PM
I did the same thing to install my new 4x100 rims last month. The tuner wobble bolts from the UK work perfectly.

boxerbay
04-19-2015, 09:36 AM
More pics please. What wheels are those?

EMRtek
04-19-2015, 01:40 PM
More pics please. What wheels are those?

XXR 550, appears to be a replica of the awesome Enkei RS05-RR.

http://imagizer.imageshack.us/v2/150x100q90/909/JC9wbG.jpg (http://imageshack.com/f/p9JC9wbGj)

http://imagizer.imageshack.us/v2/150x100q90/538/YVDxgt.jpg (http://imageshack.com/f/eyYVDxgtj)