PDA

View Full Version : Quad Exhaust Tips?



bomba
07-21-2014, 04:41 PM
Hi Guys,

I'm looking to add quad exhaust tips to my Abarth. I'm having a hard time determining if there is a dual exhaust tip that will fit the stock opening in the diffuser?

I'm planning to get the Magnaflow cat-back and have some quad tips welded on. I've found these on ebay, and I'm wondering if you guys think they will fit?

I may not go for the burned tips, I'm more worried about fitting the diffuser.....


http://www.ebay.com/itm/Blue-Burnt-Exhaust-Dual-Slant-Tip-Polished-Stainless-Steel-2-5-In-3-5-Out-/261514947561?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ce3816be9&vxp=mtr

http://i.ebayimg.com/00/s/MTIwMFgxMjI0/z/sscAAOSwGiRTqfUt/$_57.JPG

http://i.ebayimg.com/00/s/MTIwMFgxNDMx/z/O6IAAOSwBadTqfUl/$_57.JPG

Listed as:

Inlet: 2.5" (63mm)
Outlet: 3.5" (89mm)
Total length: 10.5" (265mm)
Width: 7" (178mm)

I'm not crazy about the Magnetti Marelli exhaust that has quad tips because of the muffler, and the price. I'd rather get the Magnaflow or Neuspeed.

Help would be appreciated!

Thanks in advance!

Sales@roadrace
07-21-2014, 05:10 PM
Hi Guys,

I'm looking to add quad exhaust tips to my Abarth. I'm having a hard time determining if there is a dual exhaust tip that will fit the stock opening in the diffuser?

I'm planning to get the Magnaflow cat-back and have some quad tips welded on. I've found these on ebay, and I'm wondering if you guys think they will fit?

I may not go for the burned tips, I'm more worried about fitting the diffuser.....


http://www.ebay.com/itm/Blue-Burnt-Exhaust-Dual-Slant-Tip-Polished-Stainless-Steel-2-5-In-3-5-Out-/261514947561?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ce3816be9&vxp=mtr

http://i.ebayimg.com/00/s/MTIwMFgxMjI0/z/sscAAOSwGiRTqfUt/$_57.JPG

http://i.ebayimg.com/00/s/MTIwMFgxNDMx/z/O6IAAOSwBadTqfUl/$_57.JPG

Listed as:

Inlet: 2.5" (63mm)
Outlet: 3.5" (89mm)
Total length: 10.5" (265mm)
Width: 7" (178mm)

I'm not crazy about the Magnetti Marelli exhaust that has quad tips because of the muffler, and the price. I'd rather get the Magnaflow or Neuspeed.

Help would be appreciated!

Thanks in advance!

They won't fit the factory cut-out, but if you want to trim your diffuser you could get them to fit, I'd look for something a little smaller. Tough to find when I looked a while ago. But there might be something out there that isn't too pricey

Crossfirecat
07-21-2014, 05:18 PM
"BLACK" in Italy makes and sells a Fiberglas diffuser that fits the quad tips. I'll post up a link went I get home tonight. It's saved in my laptop. ;)

MikeThinks
07-21-2014, 06:58 PM
I'd also look for something with a dual wall design...unless you like melted plastic.

lenswerks
07-21-2014, 07:22 PM
If you like the Arqray diffuser designed for quad tips let me know and I'll take some photos this weekend.
I have nojeebs 1st one that was damaged.

There was a small area of damaged CF that I could not get repaired with CF.
I had it repaired and painted satin black.

It did not look correct with dual tips so I have it in storage.

Tweak
07-21-2014, 08:10 PM
This is a great thread as I want the same setup and have for a long time but never knew what might fit best.

I'd like something like this as an example... http://www.assuredautomotiveproducts.com/Flat-Matte-Black-Dual-Pencil-Roll-35-x-7-Outlet-Exhaust-Tip-AC026-BKF.htm;jsessionid=F7B5DE9CCC5437A443F3ACBE377B944 2.m1plqscsfapp01

I should just measure the opening on the Lester Carbon Fiber diffuser I have but just haven't...need money for the parts so no rush but still like to know what other options are out there in case someone has better options. Maybe this website has something that will appeal to you as well bomba.

shagghie
07-21-2014, 08:44 PM
G-tech i think....

Crossfirecat
07-22-2014, 03:17 AM
Sorry so late. Link I had was dead but they have a pic of it with the corresponding magnetti marelli quad tip exhaust on their ebay store. Just search ebay for this seller: onll_for_500
It's "Onll" not "Only". Italians?? Lol!

Edit: Found it!! http://store.blackparts.it/scarichi/spoiler-estrattore-posteriore-in-vetroresina-per-fiat-500-1-4-100hp-by-magneti-marelli.html

bomba
07-22-2014, 02:12 PM
Madness tells me that this one fits the stock opening:

http://shop.500madness.com/image/cache/data/MAGNETI%20MARELLI/exhausts/fiat-500-abarth-performance-exhaust-by-magneti-marelli-terminale-track-day-4-tips-750x563.jpg

But, if I'm going to spend this much on an axle back, I'll get the supersprint. Also, I'm not crazy about adding a muffler, or the weight that goes along with it.

Crossfirecat
07-22-2014, 04:04 PM
Here is the same exhaust without the muffler.
http://store.blackparts.it/scarichi/scarico-magneti-marelli.html

shagghie
07-22-2014, 05:05 PM
Here is the same exhaust without the muffler.
http://store.blackparts.it/scarichi/scarico-magneti-marelli.html


I hope everyone reading this realizes that if you go dual tip on an ABARTH, you MUST tilt the diagonally for it to be proper, right?

RIGHT?

Just my opinion, heh.

Crossfirecat
07-22-2014, 05:20 PM
I hope everyone reading this realizes that if you go dual tip on an ABARTH, you MUST tilt the diagonally for it to be proper, right?

RIGHT?

Just my opinion, heh.

Angled so the outermost tip is to the outside edge of the diffuser. ;)

shagghie
07-22-2014, 05:29 PM
bingo

Angled so the outermost tip is to the outside edge of the diffuser. ;)

Tweak
07-22-2014, 10:17 PM
I hope everyone reading this realizes that if you go dual tip on an ABARTH, you MUST tilt the diagonally for it to be proper, right?

RIGHT?

Just my opinion, heh.

My intention is to have a quad black tip angled diagonally unless a reasonable price arrives for some CF tips...then the quads will not be as much a consideration.

bomba
07-23-2014, 10:45 PM
I just stumbled across a Tubi quad tip exhaust:

http://www.gmpperformance.com/CFJFiles/GMP/28445_b.jpg

http://www.gmpperformance.com/index.cfm?PG=detail&PID=281017

Looks like it will fit the diffuser, but I'm not sure it would mate up to the mid-pipe from Magnaflow or even Neuspeed.

My goal is still to get the Norcal 2.25" modded DP, with quad tips....

mkdragn
07-24-2014, 12:02 AM
If you look on Hamann's website and find our car, they have a quad tip exhaust from what I remember. It angles upwards too and looks mean.

shagghie
07-24-2014, 12:48 AM
I just stumbled across a Tubi quad tip exhaust:

http://www.gmpperformance.com/CFJFiles/GMP/28445_b.jpg

http://www.gmpperformance.com/index.cfm?PG=detail&PID=281017

Looks like it will fit the diffuser, but I'm not sure it would mate up to the mid-pipe from Magnaflow or even Neuspeed.

My goal is still to get the Norcal 2.25" modded DP, with quad tips....

I think you mean 2.5" modded DP.... (2.25" is too restrictive at 240hp...)

bomba
07-24-2014, 11:14 AM
If you look on Hamann's website and find our car, they have a quad tip exhaust from what I remember. It angles upwards too and looks mean.

The Hamann looks wicked, but it requires a Hamman diffuser.

http://www.theonecar.com/wp-content/uploads/2013/10/fiat-500-abarth-pictures-180.jpg

shagghie
07-24-2014, 11:36 AM
funny they put that on a base model 500, too...

shagghie
07-24-2014, 04:34 PM
found my favorite vid ever lol:
the first car has a g-tech lemans sport (one of my favorite sounding in the whole world). The 2nd car though, has a quad tip california exhaust...and this is how it should be done IMO!!!



https://www.youtube.com/watch?v=Q8aUg_JmX7M

13VaAbarth
07-24-2014, 10:35 PM
^^^^^ That first car sounds freaking Amazing why isn't that exhaust available here? And can I import it lol.

shagghie
07-24-2014, 10:41 PM
^^^^^ That first car sounds freaking Amazing why isn't that exhaust available here? And can I import it lol.

You can totally order it and it is cheap too!

This guy;

Mike Glew
Best Exhaust Pty Ltd

FabSpeed / Supersprint / Tubi Style
Capristo / QuickSilver / Kreissieg
Milltek / Bastuck / Borla / AWE Tuning
BMC / Larini / Hamann Motorsport
http://www.bestexhaust.com.au/store/500-c-78_423_513.html

Purgatory
07-24-2014, 10:52 PM
The Hamann looks wicked, but it requires a Hamman diffuser.

http://www.theonecar.com/wp-content/uploads/2013/10/fiat-500-abarth-pictures-180.jpg

This is how a quad tip should look, imo.

Tweak
07-24-2014, 11:13 PM
You can totally order it and it is cheap too!

This guy;

Mike Glew
Best Exhaust Pty Ltd

FabSpeed / Supersprint / Tubi Style
Capristo / QuickSilver / Kreissieg
Milltek / Bastuck / Borla / AWE Tuning
BMC / Larini / Hamann Motorsport
http://www.bestexhaust.com.au/store/500-c-78_423_513.html

I usually like sarcasm...not so much here. :p

shagghie
07-24-2014, 11:47 PM
Ha! But it isn't sarcasm. G-tech stuff ls cheap, and you can ship a lemans race for 70 euros...

Tweak
07-24-2014, 11:54 PM
Ha! But it isn't sarcasm. G-tech stuff ls cheap, and you can ship a lemans race for 70 euros...

I was referring to the exhaust systems being $2K...most people are freaking out over axle back systems going past about $600 bucks. Seems like sarcasm when viewed in that context. ;)

13VaAbarth
07-25-2014, 05:45 PM
I listen to the video they have of the exhaust on that link with the prices of the exhausts and it doesn't sound the same and the first Video you posted is something else done to that car?