PDA

View Full Version : wheel gurus!!!



luka
05-22-2014, 02:15 PM
Does anybody know if a 17x9 +22 offset wheel will fit our cars. Any help is appreciated.

Oh, Word?
05-22-2014, 05:57 PM
It's going to poke a bit but shouldn't look bad pending your low. 17x8.5 +23 sits a bit more than flush and being that I'm a wheel fitment nerd I can tell you the difference between 8.5 +23 and 9 +22 ends up being ~7mm more poke. That's in the front though. The real will poke pretty bad. 9 +28 sits the lip of the wheel on the outside of the quarter so you'll obviously be 6mm further out than that.

luka
05-23-2014, 01:48 AM
I found a set of 17x9 with a +20 offset as well. Would that be better fitment?

Oh, Word?
05-23-2014, 04:35 PM
The difference wouldn't be noticeable between 20 and 22 but as a FYI the lower the offset the further the wheel sticks out, and the higher the more it sits in. You'd want a higher offset the only problem is I don't know how high of an offset you can run until you start running into hitting suspension components.