Tweet
Hi all, I am about to do a bolt on & tune overhaul on my Abarth at a tuning&fab shop. My question is if the HPSI silicone vacuum hose kit is compatible with the mods I'm giving the shop to install on my car.
Atm HCI, Atm FMIC,Forge WGA,BOV, MpxTB are the mods the shop will install on my car. What I am worried about is that some of my parts will have their own specific hoses that MUST be used for optimal perf. & safety (I see a few black hoses in these boxes)
I really like the look of these red hoses from HPSI and it looks like these are much higher quality than stock, so in a perfect world I feel like these hoses will work regardless of what parts are going in my car. Although I'm no mechanic so I am just guessing here.. :| which is why I am hoping someone here will know more about this.
This is the product: "Application: Fiat 500 ABARTH
7 Colors Available: Black, Blue, Red, Silver, Yellow, Green, Purple
(color preview available in our item photos)
This pre-cut vacuum hose kit was designed and made exclusively for the Fiat 500 Abarth. Made from our high quality silicone lines with thick durable walls, heat resistant molding, and strong bends.
-Pre cut kit with instructions
-Replaces: Crankcase ventilation hose, small connection on intake tube to bottom of pressure sensor, lower forward pointing fitting on pressure sensor to waste gate accuator, pressure port below turbo inlet to top of pressure sensor and coolant overflow hose
-500F heat resistance, 100 psi without collapsing under pressure
-Makes 180 degree bends inside itself
-Will out last the car... "
Atm HCI, Atm FMIC,Forge WGA,BOV, MpxTB are the mods the shop will install on my car. What I am worried about is that some of my parts will have their own specific hoses that MUST be used for optimal perf. & safety (I see a few black hoses in these boxes)
I really like the look of these red hoses from HPSI and it looks like these are much higher quality than stock, so in a perfect world I feel like these hoses will work regardless of what parts are going in my car. Although I'm no mechanic so I am just guessing here.. :| which is why I am hoping someone here will know more about this.
This is the product: "Application: Fiat 500 ABARTH
7 Colors Available: Black, Blue, Red, Silver, Yellow, Green, Purple
(color preview available in our item photos)
This pre-cut vacuum hose kit was designed and made exclusively for the Fiat 500 Abarth. Made from our high quality silicone lines with thick durable walls, heat resistant molding, and strong bends.
-Pre cut kit with instructions
-Replaces: Crankcase ventilation hose, small connection on intake tube to bottom of pressure sensor, lower forward pointing fitting on pressure sensor to waste gate accuator, pressure port below turbo inlet to top of pressure sensor and coolant overflow hose
-500F heat resistance, 100 psi without collapsing under pressure
-Makes 180 degree bends inside itself
-Will out last the car... "
Comment