PDA

View Full Version : SALE $185 500E/500T ST Fiat 500 Swaybar



NORCAL SS
03-19-2014, 01:34 AM
My buddy Roel over at Suspension Techniques talking to him today has seen my Abarth pop up on his facebook page (and his done up red Silverado on mine) so we started talking about their bar which looks like a nice little unit.

Finally the 500E/500T guys are covered.
I have the 500 models for $185 Shipped to the lower 48 (see it for less as always ill beat it)
7/8 thick (22.22 mm)

I attached install PDF so you guys can check it out and if you have any questions just ask.

Here are some pics. I did a 500 today and rear feels alot better now (did my bumpstops also. I installed the konis last week on his car) I will be doing another car on Saturday ill get pics up of it then

http://i10.photobucket.com/albums/a104/NORCALSTI/ABARTH/st3.jpg
http://i10.photobucket.com/albums/a104/NORCALSTI/ABARTH/20140326_210525.jpeg
http://i10.photobucket.com/albums/a104/NORCALSTI/ABARTH/20140326_210633.jpeg

NORCAL SS
03-27-2014, 03:11 AM
pics added

Doohickie
03-27-2014, 11:17 AM
I noticed that the parts list has 4 bolts but only 2 nuts, and that no nuts are called out for the first pair of bolts that go into the existing hole. Is there something threaded in the first pair of holes?

lammie200
03-27-2014, 11:39 AM
I noticed that the parts list has 4 bolts but only 2 nuts, and that no nuts are called out for the first pair of bolts that go into the existing hole. Is there something threaded in the first pair of holes?

I seem to recall getting 4 bolts and 4 nuts. There is no welded nut on the shock perch.

I can echo what Tony says about the improvement in tracking for the rear end. The difference isn't that subtle IMHO.

tknospdr
03-27-2014, 12:27 PM
beerchug

Tweak
03-27-2014, 08:16 PM
Two holes must be drilled for the installation in case that was a question.

NORCAL SS
03-27-2014, 10:59 PM
comes with 4 bolts/nuts and yes have to drill 2 holes. now its weird 4 cars the front I had to just open up oem hole while 2 others bolt went right thru. Im thinking there are 2 runs of rear suspension beams. Seems like one production version has a bigger hole in front.

Nero12
03-27-2014, 11:29 PM
Very worthwhile upgrade. Made the Dragon a whole lot more fun to tame :cool:

msjulie33
03-27-2014, 11:55 PM
comes with 4 bolts/nuts and yes have to drill 2 holes. now its weird 4 cars the front I had to just open up oem hole while 2 others bolt went right thru. Im thinking there are 2 runs of rear suspension beams. Seems like one production version has a bigger hole in front.

It's odd they would change the size of the drain unless they thought it was too large and stuff was going back up inside? Those pieces do look nice, cleaner than the block + bar type.

NORCAL SS
06-17-2014, 02:27 PM
Shooting one bar out to Silver to put on a 500E

sliver
06-23-2014, 12:00 AM
Fit perfect on my 500e. Thanks Tony.

NORCAL SS
06-23-2014, 12:09 AM
no problem. I had a feeling it would but didnt want to jump the gun.